M14 x 2.0mm Binx Self-Locking Hex Nut, Metric, Grade 5 Steel, Zinc Plate
|Fastener Type||Self-Locking Hex Nut, Metric Thread Pitch|
|Fastener Finish||Zinc Plate|
|Nut Thread Size||M14|
|Nut Thread Pitch||2.0mm|
The Binx Self-Locking Hex Nut is an all metal prevailing torque type self-locking nut.
The locking action of the Binx Nut is provided by two slots cut into the side of the nut which locally changes the pitch. When tightened onto a bolt this change in pitch results in the nut threads gripping the flanks of the bolt thread resulting in a locking action.
The height of the Binx Nut is no greater than a standard nut so it can be used in confined spaces.
The all metal Binx Nut means that the nut can be used at elevated temperatures (up to 300 degrees), and is not affected by oil.
The property class of the Binx Nut is 5, so it is suitable for use with tensile bolts of property class 5.8 and below (bolts include: 5.8, 5.6, 4.8, 4.6, 3.6).
The finish on the Binx Nut is Electro Bright Zinc Plate (ZP).
The Binx Nut can be re-used and still maintain a locking action. To achieve the full locking action of the nut, it is recommended that at least two bolt threads should protrude through the top of the nut.
Free delivery on all orders over £75 (excludes VAT) to addresses in mainland UK.
Standard delivery fee is £7.95 (excludes VAT) on all orders under £75 (excludes VAT) to addresses in mainland UK.
Deliveries to addresses in mainland UK are made by courier or Royal Mail. A signature is usually required upon delivery.
For delivery on all orders to addresses outside of mainland UK, additional courier or postage fees to those shown above may apply. If additional fees apply, we will contact you prior to dispatch to advise of the amount and collect payment.
Deliveries to addresses overseas are made by courier or Royal Mail. A signature is usually required upon delivery.