M4 x 0.7mm Coneloc Self-Locking Hex Nut, Metric, A2 Stainless Steel
| Specification | |
| Brand | Coneloc |
| Fastener Type | Self-Locking Hex Nut, Metric Thread Pitch |
| Fastener Material | A2 Stainless Steel |
| Nut Thread Size | M4 |
| Nut Thread Pitch | 0.7mm |
The Coneloc Self-Locking Hex Nut is an all metal prevailing torque type self-locking nut.
The locking action of the Coneloc Nut is achieved by localised precision deformation of the thread in the cone section on the top of the nut. When the nut is tightened onto the bolt, the thread is gripped on the flanks providing the locking action.
The all metal Coneloc Nut means that the nut can be used at elevated temperatures (up to 300 degrees), and is not affected by oil.
The Coneloc Nut A2 Stainless Steel can be used with stainless steel bolts and washers.
The Coneloc Nut meets the requirements of the BS EN ISO 2320-2008 standard (prevailing torque type steel hex nuts, mechanical and performance requirements).
The Conloc Nut can be re-used and still maintain a locking action of the nut. To achieve the full locking action of the nut, it is recommended that at least two bolt threads should protrude through the top of the nut.
"Coneloc" is a Trademark owned by Nuts Bolts Ltd.
UK Delivery
Free delivery on all orders over £75 (excludes VAT) to addresses in mainland UK.
Standard delivery fee is £7.95 (excludes VAT) on all orders under £75 (excludes VAT) to addresses in mainland UK.
Deliveries to addresses in mainland UK are made by courier or Royal Mail. A signature is usually required upon delivery.
Overseas Delivery
For delivery on all orders to addresses outside of mainland UK, additional courier or postage fees to those shown above may apply. If additional fees apply, we will contact you prior to dispatch to advise of the amount and collect payment.
Deliveries to addresses overseas are made by courier or Royal Mail. A signature is usually required upon delivery.